November 28, 2014

Summary of the reasons for troubleshooting brake system

Automotive brake pedal stroke is too large, the braking action is slow, and even loss of braking efficiency is very low, the braking distance increase. 


Cause: 1, the brake oil pressure is insufficient. (Brake master cylinder oil, brake pipe rupture, leaking pipe joints, oil plug). 2, air in the brake system. 3, the brake pedal free travel or brake gap is too large, the brake shoe lining is bad, badly worn or oil. 4, the brake master cylinder, wheel cylinder piston with connecting rod and cylinder tube wear or injury, cups aging damage. 

Troubleshooting: A continuous brake pedal, pedal gradually increased and flexible feel, but when you pause and then the pedal is still low, that is, there is air in the brake system, brake system response time row gas. 2, foot brake not working, but when the brake pedal several times in a row tread with good results, the brake pedal free travel is generally too large or brake gap is too large. Pedal free travel should be adjusted, and then check the brake clearance, if necessary brake repair disintegration. 3, when the brake pedal is depressed, not weak and heavy, but it is bad braking effect, this phenomenon is the fault of the wheel brakes, brake shoes as there is oil or poor contact, friction plate aging, wear, brake drum wear uneven. Brake response technical condition inspection, adjustment and repair if necessary. jolin car blog

Posted by: Isabeller at 06:07 AM | No Comments | Add Comment
Post contains 245 words, total size 2 kb.

Driving School FAQ

Unable to add an automatic transmission gear how to do? 

Q: Recently at high speed driving, the speed to 160, gear or three block, when to give oil plus gear, automatic transmission, but can not add block, ask how to do?
 Re: the emergence of this phenomenon, it may be when the hydraulic solenoid valve fails, automatic transmission will enter the slope line mode, it will force the three block traffic, the failure of a pressure regulator failure, the need for timely repair shop to be checked, the first replacement transmission oil, if the oil change will be locked in three gear, then you need to replace the solenoid valve. 

Acceleration is why there is buzz? 
Q: Recently, while driving, the car has found buzzing sound when accelerating with Suzuki Conrod, especially when the windows down, more to hear the sound, is this what is the reason? 
Reply: It is recommended to check the opening of the electronic throttle body, if the opening of a large, you need to wash the throttle body. Second, look at the air filter usage, if the filter is too dirty, you will need to be replaced in a timely manner. There is also a look at the exhaust back pressure is normal, and see whether the catalytic converter clogged.

 Servo steering headlights frequent error how to do? 
Q: Why does my car in the steering, with the move before the big lantern frequent error it? Display also appeared faulty headlights tips. 
Re: ordinary car headlights mounted on a fixed range of irradiation, when the car turn in the corners at night, unable to adjust the lighting angle, often there will be "blind spots" in the inside of the curve, a great threat to the safety of the driver at night driving. Lighting in the area where the car, turn on the headlights follow regarded as more sophisticated technology equipped. The emergence of this problem, there may be broken headlight sensor, if during the warranty period can be open to the 4S shop for replacement. Blog visit: honda parts 

Uphill transmission (cvt) skid how to do? 
Q: Recently I drove towards the exit from the underground garage, the car has frustrated during uphill and then turn off. Then the car, gearbox skidding, is this what is the reason? 
Re: Transmission slipping phenomenon, most cases are due to the transmission itself caused by poor performance, there may be slippage due to internal transmission of abnormal wear of the friction plate caused by the low oil pressure or, if the above phenomenon to appear in more frequently, it is recommended to work in time to shop specializing in transmission performance tests conducted on-site inspections.

Posted by: Isabeller at 06:05 AM | No Comments | Add Comment
Post contains 450 words, total size 3 kb.

November 25, 2014

Mercedes-Benz CLS63 AMG modified police car

Recently in New York, has been a topic of police cars appeared on the streets of Manhattan. A New York City police have painted as standard Mercedes CLS 63 AMG assumed during New York Fashion Week, Manhattan's transportation security patrol. And this particular Mercedes-Benz police car did not like an ordinary Ford Crown Victoria as the slogan should be marked in the body, but the choice of the body painted "Fashion Force" slogan. 


This Mercedes-Benz CLS 63 AMG is to promote the image of the city of New York City and New York Fashion Week a very unique resort. Municipal officials said the use of such an elegant design with plenty of power, but the police is an expression of confidence in New York City as a unique personality wonderful city, but also to express the position of New York City: the birthplace of the world's fashion trends . 

To be sure, the New York City Police's vision really good. The latest Mercedes-Benz CLS 63 AMG is equipped with a twin-turbocharged V8 engine connecting rod, this engine output power can reach 518 horsepower. I believe this performance, if any crime in New York City, he is very difficult to be able to escape this with style there is a speed police chase. 

Welcome to honda parts

Posted by: Isabeller at 05:52 AM | No Comments | Add Comment
Post contains 222 words, total size 2 kb.

Audi A7 appearance and power conversion

Specifically for the Volkswagen Group brands retrofit manufacturers ABT, A7 tailored for a conversion kit. In this conversion kit provided in the ABT Audi A7 will be able to get a new set of conversion kits designed aero and power on. 


In appearance, ABT for this very exciting exterior design of the Audi A7 four-door coupe design a relatively low-key style aero package. The aero package includes a new front and rear styling bumpers, side skirts and rear body-color rear spoiler. In driving terms, ABT offers from 19-21 inches in various sizes ranging from high-strength aluminum alloy wheels for customers to choose. Although the original style is very elegant Audi A7, and this aero shape is also relatively low-key, but the overall shape after modification was able to make this sporty Audi A7 is more intense. 

In power, ABT Audi A7 with the original 3.0-liter TFSI engine and TDI engines rods better than Audi A6 rods provide a range of conversion options, Power and Power S is divided into two different power depending on the power output of the retrofit kit. 3.0 l TFSI gasoline engine factory output is 300 horsepower, after modifications to the engine management system ABT optimization and related peripheral components, the output power can reach 400 horsepower. 3.0 l TDI diesel engine factory output power of 245 horsepower. After conversion optimization and related peripheral components on the engine management system, power output can reach 282 horsepower and 310 horsepower. 

Conversion costs, the price of a basic set of conversion kits at around $ 10,000. Plus the Audi A7's official price of around $ 70,000, just to spend one seventh of the price of the original price of the car you can be your own Audi A7 make a drastic makeover from the appearance of power, or more cost effective. 

Posted by: Isabeller at 05:50 AM | No Comments | Add Comment
Post contains 313 words, total size 2 kb.

November 20, 2014

The new SPIRIOR concept car with avant-garde

Deep in the 2014 Hong Kong and Macao Auto Show, the new SPIRIOR concept car interiors for the first time exposure. New car for the young consumer demand considerations, in the control panel to the driver as the center, to create a good sense of technology, the center console is also more avant-garde styling. It is reported that the new SPIRIOR will measure production market in the fourth quarter of this year. 


Full SPIRIOR concept car at the Beijing Auto Show in April this year has been unveiled, but its interior was still shrouded in secrecy. The SPIRIOR Macao Auto Show is the first public exposure concept car interiors and Honda connecting rods, interior design full account of the needs of young consumers after 80 stylish, personalized diversified. Its 360-degree cockpit-one design, the control panel for the driver as the center, easy to operate various functions on the car. The large size of the control display is to enhance the sense of technology of the vehicle. 

Interior color, the new SPIRIOR future there will be two all-black colored interior and ivory-based alternative. The information provided from the official point of view, it's the seat of molecular materials with high-tech fabrics will enhance a sense of quality. Its connecting rods is high performance as R33 rods. Configuration, the new SPIRIOR concept car equipped with a head-up display system, pre-collision warning system, lane deviation warning systems, as well as smart safe driving support system that provides adequate security for drivers. 

It is worth mentioning is that it is equipped with a smart screen navigation system interconnection. The system can connect your smartphone, through the screen of the phone application and can connect WIFI hotspot, to achieve Internet access.

Posted by: Isabeller at 06:54 AM | No Comments | Add Comment
Post contains 293 words, total size 2 kb.

Dubai's new generation of Mercedes-Benz GLK

Overseas media exposed a group photographed in the streets of Dubai whole new generation of Mercedes-Benz GLK spy photos, the new car will be launched in September 2015, then will launch GLK Coupe and the new high-performance version of the other models GLK AG in 2016. 


New car than the current model has been lengthened, and the width will be a corresponding increase in passengers will have ample seating space. The next-generation GLK lines more smooth, dynamic, not like cash as angular GLK, shape style will be close to the coupe. With the new generation GLK has the appearance of cross-border style, Mercedes-Benz will launch a two-door Coupe version is based on a new generation GLK, this new model is likely to be named the Mercedes-Benz GLC. 

New generation GLK is likely to be the first use of the Mercedes-Benz MRA (Modular drove back) vehicle platform, similar to MFA platform, MRA is dedicated to the front-wheel-drive Mercedes longitudinal modular platform. We can see MFA platform has been helping to create a B grade, A grade, GLA level, CLA level and other vehicle models, flexible platform MRA will have such effect. 

Power, the new generation GLK is expected to adopt a new 1.8T four-cylinder turbocharged engine custom engine rods, and 3.5L V6 engine on cash GLK350 will be recalibrated. In addition, AMG version of the model may adopt 4.0L V8 twin-turbo engine. GTR conrods is also high performance, wish you like.

Posted by: Isabeller at 06:49 AM | No Comments | Add Comment
Post contains 246 words, total size 2 kb.

November 18, 2014

Mercedes - Benz A45 AMG Erika

Recently, AMG Performance Studio has released a unique Mercedes - Benz A45 AMG Special Edition, and its named "Erika". To make this special edition model with an attractive appearance, studio with a matte black body and grille, side mirrors and rear spoiler with a pink details of the modification, addition, bright black decor bars and AMG classic heartbeat pattern, so that the vehicle's excellent visual effects. 


Not surprisingly, the pink theme extends to the cabin interior, sport seats with color, apply a stronger contrast pink stitching, style fit carpets, air conditioning vents and sill strips. 

If black powder style did not win everyone's heart, then take a look at its dynamic parameters of it, 2.0-liter twin-turbocharged four-cylinder engine h beam rod, maximum power 355 hp and peak torque of 450 Nm, with a seven-speed AMG SPEEDSHIFT dual clutch transmission power output to the all-wheel-drive system, making it one hundred kilometers acceleration time of just 4.6 seconds, top speed electronically limited under can reach 250 km / h.

Posted by: Isabeller at 07:01 AM | No Comments | Add Comment
Post contains 173 words, total size 1 kb.

Modified 400-horsepower Volkswagen Golf R

This year's Beijing Motor Show concept car Volkswagen Golf R400 has been a great concern, recently, also confirmed that the car will be mass production, the specific release date has not been confirmed, but recently Oettinger tuning company also launched a "R400 ", a maximum power of 400 hp Golf R with VW Golf rods, the car is obviously Oettinger power line in the R400, R400 let those who can not wait to have a new choice. 


Oettinger for the Golf R's power system is optimized to 2.0 l turbocharged engine's maximum power with VolksWagen rods increased from the original 300 hp to 400 hp, 0-100km / h in just four seconds (Golf R 0-100km / h and 4.9 sec), and golf R400 concept car 3.9 seconds is almost the same. Currently Oettinger yet to disclose the price of this power upgrade kit.

Posted by: Isabeller at 06:59 AM | No Comments | Add Comment
Post contains 148 words, total size 1 kb.

November 14, 2014

Repairer car become art

Noble quality Rolls-Royce comes from its superb quality. Its founder Henry Royce once said: "Car prices will be forgotten, and the quality of the car has long endure." Rolls-Royce's success thanks to it has been adhering to the British tradition of repairer art: concise, long-lasting, exhaustive. So incredible is that, since 1904 to the present, more than 60% of the Rolls-Royce is still a good performance. 


Rolls-Royce most unusual is that it makes extensive use of manual labor, relatively high labor costs in the UK, which will inevitably lead to high production costs, which is the reason for the amazing price of Rolls-Royce's one. Until today, Rolls-Royce engine with h beam rod also manufactured entirely by hand. Even more amazing is that the front of the Rolls-Royce radiator grille entirely by hand by skilled and eyes to complete, without any measuring tools. And a radiator requires a worker to manufacture a full day out, and then it also needs five hours for processing polished. 

Rolls-Royce cars per head of the mascot - the winged goddess of joy, her generation and the manufacturing process, it is the pursuit of perfection Rolls Royce an excellent example. Rolls-Royce car designer Sake Si so the subject to describe his design philosophy: "graceful goddess to board the first Rolls-Royce car for the pleasure of the spring, along breeze and swaying." This idea goddess Rolls Royce styling is great embodies the spirit of striving for excellence. This statue of the goddess production process is also very complicated. It uses the traditional wax process, entirely by hand poured molded type, and then hand-polished at least eight times, then buffed statue placed in a machine equipped with mixing in abrasive grinding material 64 minutes performance parts. Go through rigorous testing to do a goddess.

Posted by: Isabeller at 06:40 AM | No Comments | Add Comment
Post contains 300 words, total size 2 kb.

Toyota develops green cars "pioneer"

Can be considered representative of Toyota's strategy for the 21st century, that humans live in harmony with the environment. It is the world's first use of hybrid technology, the use of the gasoline engine in normal driving, when the gas-guzzling start and uphill, such as automatic switching to electric motors. Use the "pioneer" car, consume an average mileage per liter of petrol increased by 1 at least compared to other cars, pollutants reduced by 90%. 


In addition to already commercialized "pioneer", Toyota is testing all-electric car E-com. Fuel cell vehicles are developed to the third generation. Toyota invested 6% of sales per year, 1.2 million people rely on the research and development team, proudly carried the development work "green" vehicles with h beam rod

Toyota chairman Hiroshi Okuda was quoted saying that "the destruction of a person before God, let him success for 40 years." Means that Toyota should not be made to meet the success of 60 years, but should be prepared for a second venture. Reporters believe that this mission will be the second start of "pioneer" green cars representatives with Toyota connecting rods to play.

Posted by: Isabeller at 06:36 AM | No Comments | Add Comment
Post contains 193 words, total size 1 kb.

November 12, 2014

Why should we modified suspension system?

â‘  enhance handling How is a project of how manipulative some modification enthusiasts often mention, the image of the vehicle handling many factors, such as the structure of the vehicle itself suspension, steering system, body weight distribution, suspension of hardware and software, etc., we often mention the comfort and handling of this issue can not have both in the test drive the manuscript, and to adjust one part comfort and motion characteristics of the balance between the two is the shock absorbers.


â‘¡ let the car more beautiful appearance For many owners, modified shock absorbers handling not just the pursuit of improvement, there is the upgrade in order to get a good look at the vehicle modifications. Here, we have to mention that the modification riders circle proverb, "a low cover 100 ugly", so many owners converted the original intention was to reduce the shock chassis of the vehicle engine parts, make your car more low affixed gesture let rim shape and body lines blend, so that the appearance of the vehicle will look very harmonious, recent heat up HellaFlush modification is because of this. 

Of course, the modification of the vehicle is a pursuit of "balance" of the arts, too low in the vehicle h beam rods chassis will be severely affected by the capacity of the vehicle, and excellent shock modification might make motorists difficult to cope in everyday use. Therefore, taking into account daily driving and improve vehicle handling is our goal. (Athletic modified racing and off-road vehicle modification is not within our scope of this exchange)...

Posted by: Isabeller at 07:17 AM | No Comments | Add Comment
Post contains 266 words, total size 2 kb.

Obama's Cadillac limousine introduction

Q1: Obama car car protection capability how strong? 

A: car car made of high strength steel, aluminum, titanium and ceramic materials, door thickness of 20 cm, chassis armor thickness of 12 cm, can withstand a variety of firearms, ammunition attack; even in the tires all off under the circumstances, can still quickly left the scene of the attack. President of the car is also equipped with advanced communication systems, oxygen and fire systems, President blood samples, as well as some defensive weapons. Due to various security facilities plus body, the presidential limousine weighs 4.5 tons. Another car is equipped with a 6.5 l diesel engine. 

Q2: this car is a Cadillac DTS limousine change it? 
A: not completely say. Cadillac car for the president to create exclusive, based on travel safety and security needs and tailored the president, can not be simply attributed to a specific amount of money under the name of the production car. But obviously the presidential limousine Cadillac family characteristics and brand elements, in addition to many performance car parts of existing or previous amount will be taken from the production model Cadillac. For example Escalade headlights, SLS / STS taillight and license plate frame and so on. 

Q3: President interior is very luxurious car yet? 
A: No. Because the American taxpayer is willing to move their president to build a fortress, but do not want to build a movement for his palace. In addition to a full range of protection and a luxury car should be decorated and configuration, president luxury car without any additional decoration. 

Q4: US presidential car license plate it? 
A: There must be. US presidential limousine is perhaps the world's most cattle "car deck" because the Secret Service and the president to defend all of its vehicles concerned, hanging is "800-002" number plates. The license itself is nothing special. During the US president's visit, the presidential limousine local license plates may be suspended in accordance with local regulations. For example, this came to Beijing, his car license plate hanging is the Chinese standard, "make 224" for the US Embassy in paragraph number. 

Q5: "Army One" is part of the Army it? 
A: do not belong. Like "Air Force One", as people used "Army One" to refer to the presidential limousine, but in fact, this special vehicle does not belong to the Army, but under the jurisdiction of the United States Secret Service (USSS).

Posted by: Isabeller at 07:12 AM | No Comments | Add Comment
Post contains 406 words, total size 3 kb.

November 11, 2014

Introduction exhaust turbocharger

Exhaust gas turbocharger (Turbo Charger) is the use of exhaust gas energy to pressurize the system. In general, if we see the tail Turbo or T in the car, which showed that the car uses the engine is a turbocharged engine. I believe we are on the road have seen many such models, such as the Audi A6 1.8T, Passat 1.8T with Passat rods, 1.8T Bora and so on. The main effect is to increase the turbocharged engine intake air, thereby increasing engine power and torque, so the car is more fresh. After an engine fitted with a turbocharger, which is not loaded with the maximum power of the booster can be increased when compared to 40% or even higher. This also means that the same one of the engine after the supercharger can produce greater power. Take our most common 1.8T turbocharged engines, after pressurization, power can reach the level 2.4L engine, but the fuel consumption of the engine is not much higher than 1.8, on another level, is to increase fuel economy and reduce emissions. But after a supercharged engine, when the working pressure and temperature are significantly increased, so the life of the engine than the same displacement of the engine without the supercharger to be short, and the mechanical properties, lubrication performance is affected, which also in a certain extent, limit the turbo technology in the engine. Other shortcomings and we often say "hysteresis", but now through technological improvements, the engine at low speed supercharger can intervene, "hysteresis" feeling has been very small. Currently, in addition to a single turbine engine h beam rods, many for the pursuit of high-performance sports car will be equipped with a twin-turbo or even four turbine engines.

Posted by: Isabeller at 07:44 AM | No Comments | Add Comment
Post contains 290 words, total size 2 kb.

Keep life save - airbag maintenance

Airbags, as the name suggests is to protect drivers and passengers safe, safe driving, the airbag is not functioning, especially in the frontal crash once an emergency occurs, it will play a role to ensure the safety of your life. Therefore, understanding and careful maintenance of the car's airbag is one thing you can not be ignored. 


First, the airbag is disposable products. After the collision set off the airbag will no longer have the ability to protect, and shall be returned to the repair factory to replace a new airbag. Due to different models, price is not the same as the airbag. Choose performance parts also means choosing performance airbag.

Second, do not balloon in front of, above or near the place items. Because the balloon will be detonated in an emergency situation, so do not be in front of the airbag, above or near the place items to prevent harm being detonated airbag when the occupant ejections out. In addition, the installation CD, radio and other accessories in the room, to comply with the provisions of the manufacturer, not arbitrarily modify parts and lines fall within the scope of the airbag system, so as not to affect the normal operation of the airbag. 

Third, children have to pay attention when using airbags. At present, many airbags are designed for adults, including the location of the air bag in the car, height. Balloon when inflated, it may cause harm to the child in the front row. Suggested that children placed in the middle rear position and secure. 

Finally, note that the daily maintenance of the airbag. When fitted on the dashboard of the vehicle's airbag indicator light, under normal circumstances, the ignition switch to the ACC position or the ON position, the warning light will shine about four or five seconds, self-test, then turn off. If the warning light stays on, it means that the airbag system is faulty, should immediately repair to avoid the situation airbag malfunction or misuse of the pop-up appears. 

You must be interested in custom engine rods

Posted by: Isabeller at 07:40 AM | No Comments | Add Comment
Post contains 349 words, total size 2 kb.

November 06, 2014

Toyota Sienna / YARIS modification car

2014 SEMA International Exhibition was officially opened recently converted curtain, as modified show regulars, the modified cars Toyota lineup is very strong indeed, the most striking is the DUB version of the Toyota Sienna and YARIS. Lift Sienna, people often think of it business with IKEA practicality and comfort of the car as a nanny, but this time Toyota has given us a completely different DUB a customized version of Sienna. This car has a special modulation sky gray body and brown windows, due to very fine mesh front grille, so its front face appear more angular. Its rod is good as Audi A4 rods In addition, this Sienna in reducing the height of the suspension effect is also fitted with a good wide-body kit, upper 22 inches alloy wheels and Nitto 420S tires is that it has a strong VIP style. To cope with the increased size of the wheels, this Sienna also dress up a large size TRD brake kit and Stop tech brake calipers. Such a change is sufficient to subvert the people's traditional image of this station Sienna. Subversive appearance must have sufficient personality to match the interior, which sets Sienna equipped with a customized version of the black and white leather interior, ambient lighting color also has been specifically designed. Also worth mentioning is that this Sienna assembled a full stereo system, in addition to four subwoofers, eight speakers, the car is also equipped with a five-play audio amplifier and can be two LCD screen, racing parts vehicle can move like a karaoke. The same style is also extended to this DUB Edition Toyota YARIS body. Remove lowered suspension, 20 inches Dropastars customized version of the wheels, TRD big brake kit size and StopTech brake calipers, but this YARIS exaggerated wide body kit with black and white stitching color paint to make it look more personalized and more compelling. cars speeding is focused in show. Not only that, this YARIS front dress, a pair of Sparco racing bucket seats, and among the first to install a rear anti-roll bar. In addition, it switched to a large area of carbon fiber interior panels and the installation of a four-speaker, dual subwoofer high-power audio system, so it transformed into the evolution of rock and roll youth.

Posted by: Isabeller at 08:42 AM | No Comments | Add Comment
Post contains 385 words, total size 3 kb.

Kia K900 debut

SEMA modification in the current exhibition, South Korea Kia Motors has brought high-performance version of their K900 concept car, the car is based on the version of the 5.0L V8 to make modifications to upgrade, but the manufacturer has not released the final dynamic performance car. But even so, the concept has revolutionized the modified car engine parts version of K900 traditional luxury car image. From the above comparison of the picture we can see, with respect to the production version of the car is concerned, this high-performance version of the model change in appearance is the most obvious new look faded a production version of the kit have a sense of luxury, after the kit with the new color and become more compact, more athletic, and the front grille of the performance of the intercooler is our biggest guess it, exactly how much will be upgraded engine crankshaft? Unfortunately, there is no message indicating that it reinforces how much the dynamic performance, but you can see on the picture, its grille in more of a small size in the cold, which seemed to reveal a kind of spicy flavor. In addition to power, in terms of appearance, this concept car Kia is adding a new appearance package, the most obvious is the aerodynamic design of the body around the bottom, and has become HRE wheels also replace the blackened pieces of style , hidden in a red inner rim multi-piston calipers. Modified is to make cars speeding higher.

Posted by: Isabeller at 08:29 AM | No Comments | Add Comment
Post contains 252 words, total size 2 kb.

November 04, 2014

Car noise reduction focus must be clear

Road noise and tire noise is because the tires and the road surface friction vibration and noise, while the tire asphalt and concrete pavement generated noise is very different. Fanliang Yin believes that noise for road noise and tire vibration is the best way, sealed with a special vibration damping plate or plates and sound-absorbing pads and strips on the fender and door vehicle performance car parts floor and the door fully soundproof construction can effectively improve the tire noise and road noise. 


Wind noise is a car traveling at high speed the process, exceeding the door seal pressure resistance generated in the car, the faster the traveling speed, the greater the wind noise. Also, the body itself is like a box, and the sound itself, and the overlapping nature of refraction, when the sound incoming in the car, if there is no sound absorption and sound insulation and barrier to absorb, refract and noise will continue to overlap, resonate sound. Fanliang Yin said that strengthening seal resistance is the most direct and fundamental solution, door seals and inner seals can be a good solution to this problem. 

"In doing car noise before, you should first check the condition, some noise is caused by the failure of the vehicle with titanium connecting rods itself, such as the tire pressure is not normal, irregular wear, suspension or chassis and engine knock and other damage." Fanliang Yin said the doors, back-up car, truck chassis, hood and roof are the most prone to air friction noise place, therefore, these places are the focus of noise reduction processing.

Posted by: Isabeller at 05:27 AM | No Comments | Add Comment
Post contains 271 words, total size 2 kb.

Cotton insulation reduces engine noise

The main cabin noise is the noise from the engine and other mechanical components, friction between the tires and the sound of the collision and friction car broke the sound and cockpit interior panels and other components of air generated by the occurrence of vibrations generated by the internal noise and other components. Fanliang Yin said that the size of the engine sound with increasing engine speed increases with h beam rods, the sound of the engine in addition to the driver's control, the car sound engineering can be further improved, the owner can handle the engine block by professionals inside and outside the firewall, can effectively reduce the engine noise. He reminded owners that construction noise might be caused by changes in the body and affect the original equipment 4 cylinder 2.0 turbo is generally not recommended for this part of soundproofing construction operations. 


Fanliang Yin said that for engine noise, it is best to stick under the hood an advanced sound-absorbing acoustic foam material, can absorb and consume a lot of engine noise, vibration can inhibit the hood, blocking the heat from the engine, protect the car paint damage from high temperatures.

Posted by: Isabeller at 05:22 AM | No Comments | Add Comment
Post contains 199 words, total size 1 kb.

<< Page 1 of 1 >>
56kb generated in CPU 0.0138, elapsed 0.0614 seconds.
32 queries taking 0.0513 seconds, 91 records returned.
Powered by Minx 1.1.6c-pink.